Heads up! TeccoToys has once again shared word of a new printable figure that is now available to the public! Check out the Astro Engineer from their Age of Mecha line! –
Astro Engineer action figure.
please read the description below carefully:
1/35 scale printable parts, snap fit assembly, no glue required.
Figures’ helmet is a separate file, so you can print if with transparent resin/filament.
Figure height: approx. 2inch/5cm.
The parts come in FORM ( for Form2 and Form3 printers) and STL file format (for all other printers, FDM and DLP).
If you do not own or have immediate access to a printer, here’s a list of online 3D printing services you can use:
We highly recommend to choose SLA or DLP printers!
FDM prints usually do not show the intricate detail.
If you want to use online print services like Shapeways, please use the small STL files to allow for their file size limit.
The Form files are readymade: ideal part orientation + support structures are already in place.
Made to print with GreyV4 resin, 0.05mm layer height.
If you are printing on a Form2/Form3, I recommend the following procedure:
Use the standard grey resins.
After the Isopropanol wash, leave the parts out to dry for at least 6-12 hours (normal room temperature, no direct sunlight!), that way the surface is hard enough as to not rub off during assembly, yet the parts still have enough flexibility.
The joint fits are quite tight in the beginning, so make sure to wiggle the parts together slowly and carefully to avoid breaking parts. Optionally, you can airbrush or paint the parts before assembly for easier masking.
The Grey resin tends to shrink over time (the process goes on several weeks after print) until it has fully settled it’s properties.
If the joints come loose, use small portions of modelling clay, like super sculpey to fill in the gaps.
License: Attribution-NonCommercial 4.0
This new offering can be yours for just $3.99 USD. The Astro Engineer joins other printable offerings from TeccoToys:
- TeccoToys Age of Mecha Hazmat Response Unit Action Figures
- TeccoToys Age of Mecha M.U.L.E. Action Figure
- TeccoToys Age of Mecha M.A.R.V. action figure
- TeccoToys Age of Mecha M.A.E.V. Astro Support Bot Conversion Kit
Will you be picking up the Astro Engineer?
0 comments on “TeccoToys Reveals New Astro Engineer Printable Figure”